Enhanced electronic transport properties of Te roll-like nanostructures

• E. R. Viana,
• N. Cifuentes and
• J. C. González

Beilstein J. Nanotechnol. 2022, 13, 1284–1291, doi:10.3762/bjnano.13.106

• environmentally friendly solvothermal method by the reduction of Na2TeO3 and passivation with polyvinylpyrrolidone (PVP), as reported elsewhere [15]. The procedure described by Wu et al. [15] for the synthesis of Te NWs was followed, with the modification of increasing the autoclave heating to 200 °C. All

Microneedle-based ocular drug delivery systems – recent advances and challenges

• Piotr Gadziński,
• Anna Froelich,
• Monika Wojtyłko,
• Antoni Białek,
• Julia Krysztofiak and
• Tomasz Osmałek

Beilstein J. Nanotechnol. 2022, 13, 1167–1184, doi:10.3762/bjnano.13.98

• if the needles break and are deposited in the tissue [117][118]. Other non-degradable materials utilized to fabricate microneedles, include metals such as stainless steel [119] and titanium [120], ceramics, such as aluminum oxide [121], or synthetic polymers comprising polyvinylpyrrolidone (PVP) [122

Influence of thickness and morphology of MoS₂ on the performance of counter electrodes in dye-sensitized solar cells

• Lam Thuy Thi Mai,
• Hai Viet Le,
• Ngan Kim Thi Nguyen,
• Van La Tran Pham,
• Thu Anh Thi Nguyen,
• Nguyen Thanh Le Huynh and
• Hoang Thai Nguyen

Beilstein J. Nanotechnol. 2022, 13, 528–537, doi:10.3762/bjnano.13.44

• %), valeronitrile (CH3(CH2)3CN, 99.5%), chloroplatinic acid hexahydrate (H2PtCl6·6H2O, ≥37.50% Pt), sulfuric acid (H2SO4, 95–98%), polyvinylpyrrolidone (PVP, (C6H9NO)n, average Mw 10,000), and sodium borohydride (NaBH4, 99%) were purchased from Sigma-Aldrich (Germany). Low-temperature thermoplastic sealant (Surlyn

Ciprofloxacin-loaded dissolving polymeric microneedles as a potential therapeutic for the treatment of S. aureus skin infections

• Sharif Abdelghany,
• Walhan Alshaer,
• Yazan Al Thaher,
• Maram Al Fawares,
• Amal G. Al-Bakri,
• Saja Zuriekat and
• Randa SH. Mansour

Beilstein J. Nanotechnol. 2022, 13, 517–527, doi:10.3762/bjnano.13.43

• dissolving polymeric microneedles prepared by a two-layer centrifugation method as a potential treatment of skin infections such as cellulitis. The polymers used were polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP). Two formulations were investigated, namely CIP_MN1, composed of 10 mg ciprofloxacin

• results suggest that CIP_MN1 can be a potential delivery system for the treatment of S. aureus skin infections. Keywords: dissolving microneedles; microneedles; polyvinyl alcohol (PVA); polyvinylpyrrolidone (PVP); skin infection; Introduction Topical and transdermal drug delivery is a major route for

Design and characterization of polymeric microneedles containing extracts of Brazilian green propolis

• Camila Felix Vecchi,
• Rafaela Said dos Santos,
• Jéssica Bassi da Silva and
• Marcos Luciano Bruschi

Beilstein J. Nanotechnol. 2022, 13, 503–516, doi:10.3762/bjnano.13.42

• and lower toxicity [26][27]. In our previous studies, polymeric systems composed of polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and poloxamer 407 (P407) were obtained and characterized. P407 could improve structuring and rapid dispersion of polymeric matrices, which showed promising

• from Sigma (St. Louis, MO, USA). Polyvinyl alcohol (PVA) was obtained from Neon (Sao Paulo, SP, Brazil), polyvinylpyrrolidone (PVP), and ethanol 96° GL was purchased from Labsynth (Sao Paulo, SP, Brazil). SylgardTM 184 silicone elastomers kit (polydimethylsiloxane; PDMS) was purchased from Dow (Midland

• of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) in a fixed 1:1 ratio, poloxamer 407 (P407), and ethanolic propolis extract (EE) or glycolic propolis extract (GE). Supporting Information Supporting Information features pictures of molds and macroscopic appearance of the MNs, statistical

Photothermal ablation of murine melanomas by Fe₃O₄ nanoparticle clusters

• Xue Wang,
• Lili Xuan and
• Ying Pan

Beilstein J. Nanotechnol. 2022, 13, 255–264, doi:10.3762/bjnano.13.20

• micelles and the formation of Fe3O4 nanoparticle clusters, which were then coated with polyvinylpyrrolidone (PVP) to improve stability, biocompatibility and chemical features of the nanoparticles. Further SEM measurements revealed the as-formed Fe3O4 NPCs to be spherical and uniformly sized with an average

• acetylacetonate (Fe(acac)3, 99.9+%), dibenzyl ether (99%), oleic acid (90%), oleylamine (>70%), dodecyltrimethylammonium bromide (DTAB, 99%), tetradecyltrimethylammonium bromide (TTAB, 99%), and polyvinylpyrrolidone (PVP, molecular weight 58,000) were purchased from Sigma-Aldrich. Decayltrimethylammonium bromide

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

• into cross-linked polyvinylpyrrolidone (PVP) [15]. ENH membranes, along with their high porosity and high aspect ratio, possess a high permeation ability, adsorbability, and selectivity, which makes them excellent for environmental remediation, specifically for the adsorption and filtration of

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• , nanobelts, and nanotubes. These morphologies can be controllably obtained by using polyvinylpyrrolidone (PVP), sodium dodecyl sulfonate (SDS), cetyl trimethyl ammonium bromide (CTAB), or tetrapropyl ammonium bromide (TPAB) as surfactants in a hydrothermal method [56][57][58][59]. The difference of

Electrical, electrochemical and structural studies of a chlorine-derived ionic liquid-based polymer gel electrolyte

• Ashish Gupta,
• Amrita Jain,
• Manju Kumari and
• Santosh K. Tripathi

Beilstein J. Nanotechnol. 2021, 12, 1252–1261, doi:10.3762/bjnano.12.92

• -dimethylimidazolium chloride ([BDiMIM][Cl]), tested its application in polymer electrolytes, and obtained a maximum room-temperature conductivity of 2.7 × 10−6 S·cm−1. Among various polymer matrix systems, such as polyethylene oxide (PEO) [18][19], polyvinyl alcohol (PVA) [20][21], and polyvinylpyrrolidone (PVP) [22

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• consisting of choline chloride and Na2S2O3 [61]. This cathode material retained 900 mAh·g−1 over 100 cycles. A modified precipitation method for S NPs is flash nanoprecipitation using a confined impingement jet mixer, in which Na2S2O3, H2O, HCl, and a stabilizing copolymer (polyvinylpyrrolidone, PVP) form

High-yield synthesis of silver nanowires for transparent conducting PET films

• Gul Naz,
• Hafsa Asghar,
• Muhammad Ramzan,
• Muhammad Arshad,
• Rashid Ahmed,
• Muhammad Bilal Tahir,
• Bakhtiar Ul Haq,
• Nadeem Baig and
• Junaid Jalil

Beilstein J. Nanotechnol. 2021, 12, 624–632, doi:10.3762/bjnano.12.51

• ]. This method involves the reduction of metallic salts in the presence of a polyol. This synthetic method was first proposed by Figlarz and co-workers for the synthesis of rod-like silver particles. They employed ethylene glycol as polyol to reduce silver salt in the presence of polyvinylpyrrolidone (PVP

• PET films whose transmittance was calculated to be up to 92.5%. Experimental Materials All required chemical reagents, that is, silver nitrate (AgNO3), ethyl glycol, polyvinylpyrrolidone (PVP), copper chloride (CuCl2), hydroxyethyl cellulose (HEC), polyethylene terephthalate (PET) film, acetone, and

Characterization, bio-uptake and toxicity of polymer-coated silver nanoparticles and their interaction with human peripheral blood mononuclear cells

• Sahar Pourhoseini,
• Reilly T. Enos,
• Angela E. Murphy,
• Bo Cai and
• Jamie R. Lead

Beilstein J. Nanotechnol. 2021, 12, 282–294, doi:10.3762/bjnano.12.23

• of issues such as poor control of NP properties and lack of proper characterization. The aim of this study was to investigate the combined characterization, bio-uptake, and toxicity of well-characterized polyvinylpyrrolidone (PVP)-coated AgNPs in exposure media during exposure time using primary

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

• Sina Kaabipour and
• Shohreh Hemmati

Beilstein J. Nanotechnol. 2021, 12, 102–136, doi:10.3762/bjnano.12.9

• the presence of a stabilizer such as polyvinylpyrrolidone (PVP) or polyvinylalcohol (PVA). The chemical synthesis of nanoparticles is one of the bottom-up techniques due to the fact that particles are formed from collective atoms in a nucleus rather than from the bulk [104]. 2.2.1 Sol–gel process. The

Gram-scale synthesis of splat-shaped Ag–TiO₂ nanocomposites for enhanced antimicrobial properties

• Mohammad Jaber,
• Asim Mushtaq,
• Kebiao Zhang,
• Jindan Wu,
• Dandan Luo,
• Zihan Yi,
• M. Zubair Iqbal and
• Xiangdong Kong

Beilstein J. Nanotechnol. 2020, 11, 1119–1125, doi:10.3762/bjnano.11.96

• (Ti(SO4)2), 24.0 g of urea (CO(NH2)2) and 2.0 mL of 1.0 g/L polyvinylpyrrolidone (PVP) were added to a 32 mL glycol solution. The solution volume was adjusted to 100 mL and then AgNO3 was added at different molar ratios of Ag and TiO2 (1:1, 1:2, and 1:4, respectively). The prepared solution was kept

• addition to Ag and TiO2, indicating that the formation of the Ag–TiO2 nanocomposite was comparable to previously reported studies. The synthesis of the TiO2 and Ag–TiO2 nanocomposites using the polyvinylpyrrolidone (PVP)-assisted hydrothermal method is illustrated in Scheme 1. In the growth process, the

Applications of superparamagnetic iron oxide nanoparticles in drug and therapeutic delivery, and biotechnological advancements

• Maria Suciu,
• Corina M. Ionescu,
• Alexandra Ciorita,
• Septimiu C. Tripon,
• Dragos Nica,
• Hani Al-Salami and
• Lucian Barbu-Tudoran

Beilstein J. Nanotechnol. 2020, 11, 1092–1109, doi:10.3762/bjnano.11.94

• occurred [84]. Polyvinylpyrrolidone (PVP)-coated SPIONs showed an unexpected effect on human breast cancer cells (BT-474) in vitro. At concentrations between 10 and 100 µg/mL, for up to three days, nanoparticles doubled the metabolic activity and the population number of cancer cells. Only at

Multilayer capsules made of weak polyelectrolytes: a review on the preparation, functionalization and applications in drug delivery

• Varsha Sharma and
• Anandhakumar Sundaramurthy

Beilstein J. Nanotechnol. 2020, 11, 508–532, doi:10.3762/bjnano.11.41

• strength of the hydrogen bond between the pair, making it suitable for specific drug delivery applications. Hydrogen bonded PAA/polyvinylpyrrolidone (PVP) multilayer films on planar surfaces were first reported by Wang et al. in 1997 [46]. It was later extended to 3D systems in 2003 wherein PVP/methyl

Understanding nanoparticle flow with a new in vitro experimental and computational approach using hydrogel channels

• Armel Boutchuen,
• Dell Zimmerman,
• Abdollah Arabshahi,
• John Melnyczuk and
• Soubantika Palchoudhury

Beilstein J. Nanotechnol. 2020, 11, 296–309, doi:10.3762/bjnano.11.22

• studying the flow of NPs. Iron oxide NPs are extensively investigated in targeted therapy and drug delivery applications owing to their tunable size, surface functionalities, and magnetic properties. In this study, we synthesized four different polyvinylpyrrolidone (PVP)/polyethyleneimine (PEI)-coated iron

• , 98%), sodium metabisulfite (Na2S2O5, NaMBS, Fisher, 99.4%), inhibitor remover (Sigma-Aldrich), iron(III)-2,4-pentanedionate (Fe(acac)3, Alfa Aesar), polyethyleneimine (PEI, Alfa Aesar, 60 kDa – 50 wt % aqueous solution), polyvinylpyrrolidone (PVP, TCI, 10 kDa, 99%), triethylene glycol (TREG, ACROS

Gold and silver dichroic nanocomposite in the quest for 3D printing the Lycurgus cup

• Lars Kool,
• Floris Dekker,
• Anton Bunschoten,
• Glen J. Smales,
• Brian R. Pauw,
• Aldrik H. Velders and
• Vittorio Saggiomo

Beilstein J. Nanotechnol. 2020, 11, 16–23, doi:10.3762/bjnano.11.2

• variations, we found that reducing silver ions at room temperature immediately followed by an addition of a polyvinylpyrrolidone (PVP) solution formed dichroic silver nanoparticles in minutes. The addition of the reducing agent (NaBH4) to a silver nitrate solution forms nanoclusters, and the immediate

Polyvinylpyrrolidone as additive for perovskite solar cells with water and isopropanol as solvents

• Chen Du,
• Shuo Wang,
• Xu Miao,
• Wenhai Sun,
• Yu Zhu,
• Chengyan Wang and
• Ruixin Ma

Beilstein J. Nanotechnol. 2019, 10, 2374–2382, doi:10.3762/bjnano.10.228

• lead nitrate, to which polyvinylpyrrolidone (PVP) was added in order to enhance the photoelectric performance of the PSCs. By a combination of SEM, EIS, PL and UV spectroscopy and other characterization approaches, we show that the PVP additive is effective in inhibiting carrier recombination

• organic polymers. As a non-ionic polymer compound, polyvinylpyrrolidone (PVP) shows excellent solubility and physiological compatibility and is extensively applied in medicine, food, and cosmetics, which are closely related to the health of people [29]. PVP is commonly integrated in PSCs, which is

A novel all-fiber-based LiFePO₄/Li₄Ti₅O₁₂ battery with self-standing nanofiber membrane electrodes

• Li-li Chen,
• Hua Yang,
• Mao-xiang Jing,
• Chong Han,
• Fei Chen,
• Xin-yu Hu,
• Wei-yong Yuan,
• Shan-shan Yao and
• Xiang-qian Shen

Beilstein J. Nanotechnol. 2019, 10, 2229–2237, doi:10.3762/bjnano.10.215

• : 0.007 mol of Fe(NO3)3·9H2O and C2H3O2Li·2H2O, H3PO4 were dissolved in 29 g of N,N-dimethylformamide (DMF) to obtain solution A; 4 g of polyacrylonitrile (PAN) and 2 g of polyvinylpyrrolidone (PVP) were dissolved in 29 g of DMF to obtain solution B. A precursor spinning solution for the LiFePO4 nanofiber

• titanate (C16H36O4Ti), 0.9593 g C2H3O2Li·2H2O, and 0.25 mL HNO3 were dissolved in 29 g of N,N-dimethylformamide (DMF) to obtain solution A; 4 g of polyacrylonitrile (PAN) and 2 g of polyvinylpyrrolidone (PVP) were dissolved in 29 g of DMF to obtain solution B. A precursor spinning solution for the

Optimization and performance of nitrogen-doped carbon dots as a color conversion layer for white-LED applications

• Tugrul Guner,
• Hurriyet Yuce,
• Didem Tascioglu,
• Eren Simsek,
• Umut Savaci,
• Aziz Genc,
• Servet Turan and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 2004–2013, doi:10.3762/bjnano.10.197

• nitrogen-doped CDots (N-CDots). The doping with nitrogen enables us to tune the resulting emission color of the CDots from blue to green. In order to obtain color conversion layers with these N-CDots, a mixture of water-based polyvinylpyrrolidone (PVP) and N-CDots were prepared and subsequently processed

Toxicity and safety study of silver and gold nanoparticles functionalized with cysteine and glutathione

• Barbara Pem,
• Igor M. Pongrac,
• Lea Ulm,
• Ivan Pavičić,
• Valerije Vrček,
• Darija Domazet Jurašin,
• Marija Ljubojević,
• Adela Krivohlavek and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2019, 10, 1802–1817, doi:10.3762/bjnano.10.175

• with data published on polymer-coated AgNPs and AuNPs (see Table S3 in Supporting Information File 1), the toxicity of GSH-AgNPs is similar to the toxicity effect of polyvinylpyrrolidone (PVP) stabilized AgNPs on the same cell type as reported earlier [71][72]. The PVP-coated NPs were selected for

High-temperature resistive gas sensors based on ZnO/SiC nanocomposites

• Vadim B. Platonov,
• Marina N. Rumyantseva,
• Alexander S. Frolov,
• Alexey D. Yapryntsev and
• Alexander M. Gaskov

Beilstein J. Nanotechnol. 2019, 10, 1537–1547, doi:10.3762/bjnano.10.151

• Polycarbosilane (PCS) was used as a precursor. In a typical procedure, 1 g of PCS was dissolved in 10 mL of chloroform. After the PCS completely dissolved, 1 g of polyvinylpyrrolidone (PVP, M = 1 300 000) was added. The mixture was actively stirred for 5 h at 40 °C. The polymer solution was loaded in a plastic

Effect of electrospinning process variables on the size of polymer fibers and bead-on-string structures established with a 2³ factorial design

• Paulina Korycka,
• Adam Mirek,
• Katarzyna Kramek-Romanowska,
• Marcin Grzeczkowicz and
• Dorota Lewińska

Beilstein J. Nanotechnol. 2018, 9, 2466–2478, doi:10.3762/bjnano.9.231

• structure. According to this study, the higher the concentration of polyvinylpyrrolidone (PVP) ethanolic solution (higher solution viscosity) used, the thicker the fibers. In addition, both the type of solvent (its physicochemical properties) and the water content in the solvent turned out to be influential

• to assess the influence of these factors on the fiber diameter and bead size. Experimental Materials Polyvinylpyrrolidone (PVP, 1300 kDa), purchased from Sigma-Aldrich, was chosen because it can be prepared with harmless and easily accessible solvents such as ethanol. The solutions of PVP dissolved

• ) and (B) maximum electrical voltage (U = 1). Dynamic viscosity of polyvinylpyrrolidone (PVP) solutions. Process variables selected for the factorial analysis for fiber diameter. Process variables selected for the factorial analysis of bead size and fiber diameter in the fibrous mats with bead-on-string

Facile synthesis of silver/silver thiocyanate (Ag@AgSCN) plasmonic nanostructures with enhanced photocatalytic performance

• Xinfu Zhao,
• Dairong Chen,
• Abdul Qayum,
• Bo Chen and
• Xiuling Jiao

Beilstein J. Nanotechnol. 2017, 8, 2781–2789, doi:10.3762/bjnano.8.277

• Information File 1) shows the SEM image of the sample obtained without polyvinylpyrrolidone (PVP). The product was composed of nanoparticles with of tens of nanometers in diameter with a large size distribution. This result revealed that the formation of the nanoplate units which composed the Ag@AgSCN

• /silver thiocyanate nanostructures (Ag@AgSCN). Polyvinylpyrrolidone (PVP, K30, Beijing Reagent Co.) and hydrazine hydrate (N2H4·H2O, 85 wt %, Shanghai Chemical Co.) were used as stabilizer and reducing agent, respectively. For the photocatalytic test, oxytetracycline was purchased from Sinopharm Chemical